Quick Release Tent Mount Kit / 4 Piece

\nOnce these brackets are installed on a Front Runner Rack, no tools are needed to remove or install a roof top tent. \nSimply release the tabs on the 4 latches and lift the tent away in seconds. \nNo more wrenching in tight spaces during the ‘off-season’ or time-consuming weekday removal of a roof top tent. \nThis strong and rattle-free mounting system is built off-road tough for use with Front Runner Racks. \nCompatible with the TENT031 and other popular soft shell tent brands like TJM, ARB, Tepui, etc*. \nCompatible with hard shell tents such as Autohome/Maggionlina, and James Baroud*. Hard shell tent owners please read **IMPORTANT NOTE below. \n4 low profile base brackets are bolted to a Front Runner Rack while 4 self-aligning bushes are secured to the tent base channels using the appropriate Tent Channel Set. \nSecures in place with 4 latches with safety catches. Can be locked using RRAC134 combination cable lock. \nCertain tent sizes and designs will dictate the height needed to clear the edge of the Front Runner Rack. \nThe brackets are small, unobtrusive and can be left on the roof rack when the tent is not mounted, leaving vast rack space available. \nNo tent modification is required. \nRemoved tents can be stored on the ground, raised slightly off the floor by the supplied bushes. \nSupplied with all required mounting hardware. \nFitting instructions are included. \nTBMK034 or TBMK036 may be required for other tent brands (sold separately). \n*Soft shell and hard shell tents may need additional Nut Plates, sold separately. \n**IMPORTANT NOTE: Hard shell tents need additional support. If you are using these brackets with hard shell tents, such as James Baroud or Autohome, and you are unable to position the tent to rest directly on the rack, or the edges of the rack side profiles, use - TBMK009. Depending on the tent manufacturer, your hard shell tent warranty may be voided if your tent becomes damaged and you did not provide proper lateral support for the hard shell tent. \nNote: Extra Mounting Brackets may be required for some tent and rack combinations which require extra support.